Iris Folding Xmas

You Will Need:

Place an aperture cut panel over the pattern.
Secure it with a little masking tape.
You will need the same number of colours of paper as the highest number inside the outer rim of the shape.
Arrange your chosen colours next to your workspace.
Take a strip of the first colour.
Fold one edge of the strip over about a quarter of a centimetre.

Cut the strip to the length of the area marked 1.
The strip should overlap the outer edges of the shape.
Stick the strip in place using sticky tape.
You may find it easier to place a strip of sticky tape on a craft matt, then cut across the width of the tape approximately every centimetre using a craft knife. You can then use your craft knife to lift each piece of tape off the craft matt and place onto your project.
Repeat steps 5 - 9 for the area marked 2 using the second colour.
Continue in the same way, covering each area in order.

After using the last colour of paper go back to the first.
After covering all the areas stick a square of holographic paper over the hole that is left (known as the iris).
Remove the pattern from your card.

Trim the aperture panel to size.
A paper trimmer is ideal for this, but you could use fancy scissors or straight scissors.
You may like to embellish the panel further using corner punches - if so do this now.
Use double sided tape to stick your finished iris folding onto the front of the card.
Fold your card closed
Embellish as desired

Christmas Tree Card

Cut the completed iris folding panel to 8.5 x 9.5cm. Stick the iris folding panel onto the green card using double sided tape. Stick border peel offs around the edges of the panel. Finish the card with a peel off greeting.

Snowflake Card

Cut the completed iris folding panel to 8.5 x 10cm using fancy scissors. Stick the iris folding panel onto the silver card using double sided tape. Complete the card with a Dovecraft Handcrafted Boutique embellishment. Finish the card with a peel off greeting.

Large Bauble Card

Cut the completed iris folding panel to 8.5 x 9.5cm. Stick the iris folding panel onto the red card using double sided tape. Stick border peel offs around the edges of the panel. Finish the card with a peel off greeting.

Download a printer friendly copy of this project.

You will need a copy of Acrobat Reader to open the file. If you do not already have a copy you can download one from http://www.adobe.com/products/acrobat/readstep2.php

BGPayne Crafts