Embelish It White

You Will Need:

Vase Card

Use the lace corner punch to punch the two right hand corners of the card.

Cut 5 15cm lengths of beading wire. Thread one end through a pearl bead and bend the wire around the bead. Twist the ends of the wire together so that the bead is held securely in place. Thread each wire through a paper flower. Put the flowers to one side whilst you prepare the vase.

Cut out the vase shape and place it on the back of the bronze card. Draw around the vase and cut it out. Put a length of double sided tape along the length of the back of the vase. Stick the wires to this arranging the flowers at different heights. Stick another piece of double sided tape on top of the first one. Stick the vase onto the card. A little double sided tape can be used to secure each flower in position.

Fold the ribbon into a bow shape and secure it with a little wire wrapped around the centre of the bow. Stick it in place and stick a heart on top to hide the wire.

Natural Card

To use the Glue Dots Micro Dots to stick the raffia style backing to the card peel back the film and press the backing onto to Glue Dots sheet. Stick the backing in place and replace the film.

Stick the fern in place with silicone glue. Use more silicone glue to stick the bead length in place in the shape of a bow. Silicone glue takes some time to dry so it's best to put something heavy over the card and put it to one side to dry.

Sparkling Card

Cut both the fabric and the woven backing to 8cm wide. Use double sided tape to stick the fabric backing to the card. Use glue dots to stick the woven backing on top of this. Use silicone glue to stick some of the leftover embellishments on place.

Tip: Your silicone glue will dry up and be wasted unless you remove the applicator and replace the cap. The glue in the applicator will still dry up and needs to be removed before you can use the applicator again. To make this easier, put a large pin in the end of the applicator each time you have finished using it.

Download a printer friendly copy of this project.

You will need a copy of Acrobat Reader to open the file. If you do not already have a copy you can download one from http://www.adobe.com/products/acrobat/readstep2.php

BGPayne Crafts