Dimensions Birthday 4

You Will Need:

Happy Birthday Card

Cut the bronze paper to 13.5cm by 18.5cm and the cream card to 13cm x 18cm. Use double sided tape to stick the bronze paper centrally onto the card. Stick the cream card on top of it.

Stick the strawberry corner embellishments onto each corner of the card. Cut a piece of red paper to 10cm x 6.5cm. Cut the gold paper to 9cm x 5.5cm and stick them randomly onto the card as shown. Stick the Happy Birthday panel on top.

It's Party Time Card

Use fancy scissors to cut about 5cm from the right hand edge of the card. Use a bronze ink pad to sponge colour onto the front of the card. Run the edges of the card across the ink pad. Leave the card to dry.

Cut a piece of scrap card to 10 x 20cm. Use a 2cm wide scrap of card to mark pencil lines 2cm from the top and bottom of the scrap card. Mark lines 4cm in from each of these and then another 2.5cm. Cut another strip of scrap card 3cm wide and use this to mark pencil lines 3cm in from each side of the scrap card. Use a craft knife and cutting mat to cut out the three 4cm squares you have drawn. Use masking tape to secure your template to the back of the front panel of the card. Use an embossing tool to emboss the squares.

Cut some gold paper to 20cm x 15cm and stick it to the inside of the card using double sided tape. Stick the It's Party Time embellishment to the inside right edge of the card.

Use masking tape to stick the template to the front of the card and sponge gold ink through the apertures. Leave the card to dry thoroughly before applying the three round embellishments.

Tags Card

Draw a pencil line diagonally across the card. Stick border peel offs around the edges of the card and over the line. Stick the tag shaped embellishments on top of the line so that it shows through the holes on the tags. Use a craft knife and cutting mat to cut along the line and around the tags.

Cut some gold paper to 20cm x 15cm and use double sided tape to stick it to the inside of the card. Randomly stick some small peel offs onto the card.

Download a printer friendly copy of this project.

You will need a copy of Acrobat Reader to open the file. If you do not already have a copy you can download one from http://www.adobe.com/products/acrobat/readstep2.php

BGPayne Crafts