4 Berriedale Road
Nelson
Lancashire
BB9 8AX
UK
01282 691090
bridie@bgpayne.com
Open 10am - 4pm
Tuesday - Saturday
UK orders are usually
delivered within 10 days,
but please allow
up to 28 days.
Cut about 5cm from the right hand edge of the card. Run the edges of the card across the purple ink pad. Leave the card to dry.
Cut a piece of scrap card to 10 x 20cm. Use a 2cm wide scrap of card to mark pencil lines 2cm from the top and bottom of the scrap card. Mark lines 4cm in from each of these and then another 2.5cm. Cut another strip of scrap card 3cm wide and use this to mark pencil lines 3cm in from each side of the scrap card. Use a craft knife and cutting mat to cut out the three 4cm squares you have drawn. Use masking tape to secure your template to the back of the front panel of the card. Use an embossing tool to emboss the squares.
Cut some lilac paper to 20cm x 15cm and stick it to the inside of the card using double sided tape. Stick the For You embellishment to the inside right edge of the card.
Use masking tape to stick the template to the front of the card and sponge lilac and blue ink through the apertures. Leave the card to dry thoroughly before applying the three round embellishments.
Draw a pencil line diagonally across the card. Stick border peel offs around the edges of the card and over the line. Stick the tag shaped embellishments on top of the line so that it shows through the holes on the tags. Use a craft knife and cutting mat to cut along the line and around the tags.
Cut some ivory paper to 20cm x 15cm and use double sided tape to stick it to the inside of the card. Randomly stick some small peel offs onto the card. A corner embellishment can be added to complete the card.
Cut the lilac paper to 9.5cm x 6.5cm. Cut the baby blue paper to 9cm x 6cm. Cut the cream card to 8.5cm x 5.5cm. Layer the card and papers with the embellishment on top. Stick some corner embellishments onto the top and bottom right corners. Tue a length of ribbon around the spine of the card.
Download a printer friendly copy of this project.
You will need a copy of Acrobat Reader to open the file. If you do not already have a copy you can download one from http://www.adobe.com/products/acrobat/readstep2.php