4 Berriedale Road
Nelson
Lancashire
BB9 8AX
UK
01282 691090
bridie@bgpayne.com
Open 10am - 4pm
Tuesday - Saturday
UK orders are usually
delivered within 10 days,
but please allow
up to 28 days.
Cut the bronze paper to 12cm by 17cm and the cream card to 11.5cm by 16.5cm. Use the sponge to ink the card with the gold ink pad. Mount them onto the card using double sided tape. Stick the embellishments onto the card as shown. Finish the card with a peel off greeting.
Cut some scrap card to 15cm x 20cm. Cut another piece to 2cm wide and use it like a ruler to draw lines 2cm from each side and 2cm in from the top of the scrap card. Draw another line 11cm from the top line. Use a craft knife and cutting mat to cut out the 11cm square you have drawn.
Use masking tape to stick the template to the back of the front panel of the card. Emboss the square using an embossing tool.
Cut four squares of pearl gold paper to 4.5cm. Use double sided to stick the squares onto the embossed square. Stick the embellishments shown on top of each square.
Complete the card with a peel off greeting and tie a gold ribbon around the spine.
Draw a pencil line diagonally across the card. Stick border peel offs around the edges of the card and over the line. Stick the tag shaped embellishments on top of the line so that it shows through the holes on the tags. Use a craft knife and cutting mat to cut along the line and around the tags.
Cut some bronze paper to 20cm x 15cm and use double sided tape to stick it to the inside of the card. Counter peel offs can be used to complete the card.
Download a printer friendly copy of this project.
You will need a copy of Acrobat Reader to open the file. If you do not already have a copy you can download one from http://www.adobe.com/products/acrobat/readstep2.php