Dovecraft Dimensions Greetings 1

You Will Need:

Tag Card

Trim 5cm off the right hand edge of the card. Cut the pearl kingfisher blue paper to 8cm by 18cm and punch each corner with the corner punch. Cut the stardust glitter paper to 5cm by 15cm. Stick the papers to the card as shown using double sided tape.

Cut a short length of ribbon and stick it the card using the tag shaped embellishment a shown.

Cut the kingfisher blue paper to 15cm by 20cm and stick it to the inside of the card. Finish the card with a peel off greeting.

Tags Card

Draw a pencil line diagonally across the card. Stick border peel offs around the edges of the card and over the line. Stick the tag shaped embellishments on top of the line so that it shows through the holes on the tags. Use a craft knife and cutting mat to cut along the line and around the tags.

Cut some kingfisher blue paper to 20cm x 15cm and use double sided tape to stick it to the inside of the card. Complete the card with a peel off greeting.

Window Card

Cut a 4cm square from the card. To do this cut a piece of scrap card to 5.5cm wide and use it as a template to draw lines 5.5cm from the sides and top of the card. Mark a line 4cm down from the top line. Then cut out the square with a craft knife.

Carefully sperate the two layers of the square embellishment. Stick the top layer around the window. Stick the bottom layer inside the card so that it shows through the window.

Stick the four corner embellishments onto each corner of the front of the card. Complete the card with the greeting provided.

Download a printer friendly copy of this project.

You will need a copy of Acrobat Reader to open the file. If you do not already have a copy you can download one from http://www.adobe.com/products/acrobat/readstep2.php

BGPayne Crafts