Dovecraft Dimensions Vintage 1

You Will Need:

Forever Card

Stick border peel offs about 2cm from the edges of the card. To make positioning easier cut a piece of scrap card to 2cm wide and use it to draw lines 2cm from each edge of the card.

Cut some bronze paper to 8.5cm by 4.2cm and the gold paper to 8.3cm by 4cm. Stick the layers of paper and the forever embellishment to the card as shown. Complete the card with a peel off greeting and the clock embellishment.

Memory Card

Cut the ivory paper to 10cm square and stick it to the card with double sided tape. Stick border peel offs around the raw edges of the paper. Stick the memory embellishment to the centre of the ivory paper. Complete the card with the dream embellishment.

Tags Card

Trim 5cm from the edge of the card. Cut the gold paper to 15cm to 20cm and stick it to the inside of the card with double sided tape.

Cut the gold paper to 20cm by 5cm and stick it to the card as shown. Stick the gold ribbon along the edges of the paper. Cut the leftover ribbon in half and thread each half through one of the tags before sticking them in place on the card.

Download a printer friendly copy of this project.

You will need a copy of Acrobat Reader to open the file. If you do not already have a copy you can download one from http://www.adobe.com/products/acrobat/readstep2.php

BGPayne Crafts