Dovecraft Dimensions Birthday 2

You Will Need:

Tags Card

Trim 5cm from the edge of the baby blue card. Cut the pink paper to 15cm to 20cm and stick it to the inside of the card with double sided tape.

Cut the pink paper to 20cm by 5cm and stick it to the card as shown. Stick the blue ribbon along the edges of the paper. Cut the leftover ribbon in half and thread each half through one of the tags before sticking them in place on the card.

Party Card

Stick border peel offs about 2cm from the edges of the white card. To make positioning easier cut a piece of scrap card to 2cm wide and use it to draw lines 2cm from each edge of the card.

Cut some lilac paper to 8cm by 4cm and the baby blue paper to 9cm by 5cm. Stick the layers of paper and the party embellishment to the card as shown. Complete the card with a peel off greeting and the star embellishment.

Window Card

Cut a 3.5cm square from the card. To do this cut a piece of scrap card to 5.75cm wide and use it as a template to draw lines 5.75cm from the sides and top of the card. Mark a line 3.5cm down from the top line. Then cut out the square with a craft knife. Stick border peel offs about 3cm from the edges of the window.

Carefully sperate the two layers of the square embellishment. Stick the top layer around the window. Stick the bottom layer inside the card so that it shows through the window.

Complete the card with the wish embellishment.

Download a printer friendly copy of this project.

You will need a copy of Acrobat Reader to open the file. If you do not already have a copy you can download one from http://www.adobe.com/products/acrobat/readstep2.php

BGPayne Crafts