4 Berriedale Road
Nelson
Lancashire
BB9 8AX
UK
01282 691090
bridie@bgpayne.com
Open 10am - 4pm
Tuesday - Saturday
UK orders are usually
delivered within 10 days,
but please allow
up to 28 days.
Use the corner punch to cut each corner of the lilac card. Cut the white paper to 10cm x 8cm and stick it to the card using double sided tape. Use a wet paint brush to draw a rectangle 9cm x 6cm on the mulberry paper. Gently pull the excess paper away leaving the edges with a feathered effect. Use double sided tape to stick the mulberry paper centrally onto the white paper. Stick the embellishments to the card as shown and finish with peel offs.
Cut the tracing paper to 7.5cm x 20cm and stick it to the left hand side of the card. Stick a length of ribbon along the raw edge. Stick another length across the width of the card about 7cm from the top. Stick a final length of ribbon across the right hand half of the width of the card about 3cm from the bottom. Cut off the excess ribbon.
Cut the lilac paper into two squares measuring 5.5cm and 5cm. Cut the silver paper to 5.25cm squared. Layer the pieces of paper on top of each other and stick them to the card with double sided tape. Stick the embellishments to the card as shown.
Trim 5cm from the right hand edge of the lilac card. Cut the silver paper to 15cm to 20cm and stick it to the inside of the card with double sided tape. Cut the two right hand corners with the corner punch.
Cut the silver paper to 20cm by 7cm and stick it to the card as shown. Stick border peel offs along the raw edges of the paper. Apply the embellishments as shown.
Download a printer friendly copy of this project.
You will need a copy of Acrobat Reader to open the file. If you do not already have a copy you can download one from http://www.adobe.com/products/acrobat/readstep2.php