Dovecraft Dimensions Love 3

You Will Need:

Be Mine Card

Cut 5cm off the right hand edge of the card. Draw a pencil line 2cm in from the right hand edge of the card. Draw horizontal lines 5.5cm from the top and bottom of the card. Cut out the card shape shown using the lines you have drawn.

Cut the red card to 15cm x 20cm and use double sided tape to stick it to the inside front of the card. Cut some red paper to 5cm x 8.5cm and stick it to the front of the card. Apply the Be Mine embellishment as shown.

Squares Card

Cut each corner of the card with the Victorian corner punch.

Cut some scrap card to 15cm x 20cm. Cut another piece to 2.5cm wide and use it like a ruler to draw lines 2.5cm from each side and 2.5cm in from the top of the scrap card. Draw another line 10cm from the top line. Use a craft knife and cutting mat to cut out the 10cm square you have drawn.

Use masking tape to stick the template to the back of the front panel of the card. Emboss the square using an embossing tool.

Cut squares of pearl red and silver paper to 4cm, you will need two squares of each colour. Use double sided tape to stick the squares onto the embossed square. Stick the embellishments shown on top of each square.

Complete the card with a peel off greeting.

Tags Card

Stick a length of red ribbon across the width of the card about 5cm from the top. Stick the diamonds embellishment on top f the ribbon.

Cut three lengths of ribbon about 10cm long. Carefully thread each one through one of the large tags. Stick the tag to the card and attach the ribbon to the diamonds sticker. Do this for each of the three large tags.

Download a printer friendly copy of this project.

You will need a copy of Acrobat Reader to open the file. If you do not already have a copy you can download one from http://www.adobe.com/products/acrobat/readstep2.php

BGPayne Crafts