Dovecraft Handcrafted Boutique I Do
You Will Need:
- A6 Single Fold Cards
- Wedding Backing Paper
- Pearlescent Paper White
- 3mm Ribbon White
- Brads Gold
- Double Sided Tape
- Craft Knife and Cutting Mat or Paper Trimmer
- Pin
Feather Card
Cut the white paper to 13cm x 8.5cm and the ivory wedding paper to 12.5cm x 8cm. Stick them to the card using double sided tape. Apply the feather embellishment on top.
Our Wedding Card
Cut the ivory wedding paper to 10.5cm x 8cm and stick it to the card as shown using double sided tape. Cut the white paper to 6cm square. Pierce each corner with a pin and push a gold brad through each hole. Sperate the back of each brad. Stick the paper to the card as shown. Apply the Our wedding embellishment on top.
I Do Card
Cut the ivory wedding paper to 10.5cm x 6cm and stick it to the top of the card using double sided tape. Stick a length of white ribbon over the raw edge of the paper. To do this stick some double sided tape onto the card. Narrow tape is best but wider widths can be cut down to size. Stick the ribbon onto the tape and smooth it down. Stick the embellishments to the card as shown.
Download a printer friendly copy of this project.
You will need a copy of Acrobat Reader to open the file. If you do not already have a copy you can download one from http://www.adobe.com/products/acrobat/readstep2.php