Metal Tags Baby Boy

You Will Need:

Duckling Card

Cut the gold paper into two 4.5cm squares and the white card into two 4cm squares. Emboss the duck shape onto one of the card pieces. Attach the stencil to the front of the card with masking tape. Flip the card over onto a light box, a lamp under a glass table or a window. From the back of the card trace the outline of the shape with the embossing tool.

Use double sided tape to stick the gold papers to the card and the white card on top as shown. Use a 3D foam pad to stick the duck tag onto the second white square.

Run the edges of the card across a gold ink pad.

Baby Buggy Card

Cut the baby pink paper to 6cm square, the pink paper to 5.5cm square and the white card to 5cm square. Emboss the buggy design onto the white card. Use double sided tape to stick the card and paper to the card as shown. Punch each corner of the card with the corner punch.

Baby Squares Card

Cut the baby blue paper into three 4.5cm squares and the white card to 3 4cm squares. Use double sided tape to stick the squares to the card as shown. Stick each of the metal tags to the card using 3D foam pads.

Tie the blue ribbon around the spine of the card and thread a metal tag through it.

Download a printer friendly copy of this project.

You will need a copy of Acrobat Reader to open the file. If you do not already have a copy you can download one from http://www.adobe.com/products/acrobat/readstep2.php

BGPayne Crafts