BGPayne Crafts

Embelish It Natural

You Will Need:

• Dovecraft Embellish It - Natural
• Single Fold Dl Cards Linen White and Cream
• Double Sided Tape
• 3D Foam Pads
• Silicone Glue
• Masking Tape
• Craft Knife and Cutting Matt
• Ruler
• Scrap Card
• Embossing Tool
• Peel Offs
• Glue Dots Micro Dots

Daisy Border Card

Cut 2 strips of scrap card at least 21cm long by 1.5cm wide. Use these as a guide to position border peel offs 1.5cm from each edge of the white card. Use double sided tape to stick a leaf and a daisy onto the corner of the border. Finish the card with a peel off greeting.

Corrugated Squares Card

Cut a piece of scrap card to 10 x 21cm. Use the 1.5cm wide strip of card to mark pencil lines 1.5cm from the top and bottom of the scrap card. Mark lines 5cm in from each of these and then another 1.5cm. Cut another strip of scrap card 2.5cm wide and use this to mark pencil lines 2.5cm in from each side of the scrap card. Use a craft knife and cutting matt to cut out the three 5cm squares you have drawn. Use masking tape to secure your template to the back of the front panel of the cream card. Use an embossing tool to emboss the squares.

Cut the corrugated card into three 4cm squares. Use double sided tape to stick the squares onto the centre of each embossed panel. Stick a leaf and daisy on to the middle panel. Use 3D foam pads to stick hearts onto the other two panels.

Bow Card

Use glue dots micro dots to stick the woven backing onto the cream card. Stick the dried foliage onto the backing using a 3D foam pad. Fold the ribbon into a bow shape and push it through one of the metal rings to hold it in place. Trim the edges of the ribbon with a sharp pair of scissors. Stick the bow in place with two 3D foam pads. Use glue dots to stick the padded greeting onto the card.

Download a printer friendly copy of this project.

You will need a copy of Acrobat Reader to open the file. If you do not already have a copy you can download one from http://www.adobe.com/products/acrobat/readstep2.php